TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 99 of 968

TM 9-2815-210-34-2-2
FRAME 56
1.
2.
GO
NOTE
All seven upper main bearing halves (1 and 2) have an
alinement tab (3) off center as shown. All seven lower
main bearing halves (4 and 5) have alinement tab (6)
in center as shown.
Spread a thin coat of Prussian blue on surface of upper main thrust bearing
half (2) which rests on main thrust bearing saddle (7).
Put upper main thrust bearing half (2) on thrust main bearing saddle (7).
Alinement tab (3) must fit in notch (8) in thrust main bearing saddle.
TO FRAME 57
4-80


Back to Top