TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 88 of 266
TM 9–1200–215–34&P
2–53
2–24.
BACKPLANE MAINTENANCE INSTRUCTIONS CONTINUED
b.
INSTALLATION CONTINUED
CAUTION
The EMI shielding gasket is vital to
this piece of equipment and is easily
damaged. Handle with care when
removing or replacing it. Failure to
comply may result in damage to
equipment.
10. If removed, install EMI shielding gasket (7) in
groove in housing (3).
11.
Position connector panel assembly (4) on
housing and align holes.
12. Install 16 screws (5) and 16 flat washers (6).
Follow torque sequence chart below, torque
screws to 30 in.–lb (3.4 N
S
m).
13. Install hard disk drive (2) into ACU.
14. Insert four new screws with seals (1) into side
of ACU, securing hard disk drive (2). Torque
screws to 10 in.–lb (1.1 N
S
m).
15. Install stabilizer brackets in accordance with
procedure outlined in paragraph 2–14.
16. Install top panel in accordance with procedure
outlined in paragraph 2–13.
Change 1
10
16
31
1
5
8
12
4
15
9
13
1
7
14
2
6
1
2
5
6
4
7
3
Back to Top
