TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 84 of 266
TM 9–1200–215–34&P
2–49
2–23.
CONNECTOR PANEL ASSEMBLY WITH MAIN CABLE MAINTENANCE
INSTRUCTIONS CONTINUED
b.
INSTALLATION CONTINUED
CAUTION
The EMI shielding gasket is vital to
this piece of equipment and is easily
damaged.
Handle with care when
removing or replacing it.
Failure to
comply may result in damage to
equipment.
23. If removed, install EMI shielding gasket (4) in
groove in housing.
24. Position connector panel assembly (1) on
housing and align holes.
25. Install 16 screws (2) and 16 flat washers (3).
Following torque sequence chart below, torque
screws to 30 in.–lb (3.4 N
S
m).
1
2
3
4
10
16
31
1
5
8
12
4
15
9
1
7
14
2
6
13
Back to Top
