TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 76 of 266
TM 9–1200–215–34&P
2–41
2–22.
ETHERNET CABLE AND 1553 (CHANNEL B) CABLE MAINTENANCE
INSTRUCTIONS CONTINUED
a.
REMOVAL CONTINUED
NOTE
•
The removal of the Ethernet and
1553 cables is performed in the
same manner.
•
When removing the 1553 cable
connector, the 1553 cable will be
disconnected from the 1553 CCA.
2.
Remove ACU connector panel (1) by removing
16 screws (2) and 16 flat washers (3).
Lift
connector panel off housing.
CAUTION
The EMI shielding gasket is vital to
this piece of equipment and is easily
damaged.
Handle with care when
removing or replacing it.
Failure to
comply may result in damage to
equipment.
3.
Inspect EMI shielding gasket (4) in groove in
housing (5) for cuts, nicks, or signs of
stretching.
Discard EMI shielding gasket if
unserviceable.
1
2
3
4
5
Back to Top
