TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 487 of 801

TM 9-2320-273-34

(5)

Position the oil filter adapter in its bore in the helical gear cover (fig. 11-45). Install

washers and capscrews, and torque to 20-30 Ib-ft (27-41 N•m).

Figure 11-45. Install the Oil Filter Adapter.

(6)

Pour or squirt two ounces of specified drive unit lubricant (item 30, App B) into the oil

pump to filter passage (fig. 11-46).

Figure 11-46. Lubricate the Filter Passage.

If the filter is tightened more than one

turn after contacting gasket, damage to

the filter may result.

(7)

Coat the face of the gasket on the new oil filter with the gear lube (item 30, App B).

Install the oil filter over the adapter and tighten one full turn after the gasket contacts the base, using a

filter strap wrench. Do not overtighten.

11-41

CAUTION