TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 481 of 801

TM 9-2320-273-34

(2)

Pre-lubricate all interaxle differential parts, such as inside walls of interaxle differential case

halves, spider, pinions, and bearings, etc., with the recommended axle lubricant (item 30, App B) (fig. 11-35).

Figure 11-35. lnteraxle Differential Assembly.

(3)

If new rear input bearing is to be used, press bearing cup squarely into differential carrier

and bearing cone squarely onto rear interaxle differential side gear hub.

(4)

Position the interaxle differential case and nest assembly (rivet heads up) into the carrier

and over the rear side gear (fig. 11-36).

Figure 11-36. Install the Differential Case and Nest.

11-35