TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 482 of 801

TM 9-2320-273-34

(5)

T

O

assemble the forward side gear and helical

place on the side gear hub (fig. 11-37).

drive gear, first position the woodruff key in

Figure 11-37. Assemble the Forward Side Gear and Helical Drive Gear.

NOTE

If the helical drive gear must be replaced

with a new gear, replace both the drive

and driven gears as a set.

(6)

Place helical drive gear in a press with the flat side down and position the side gear (gear side

down) with woodruff key over the helical gear.

Make sure the woodruff key alines with the keyway in the

I.D. of the helical gear.

(7)

press the side gear into the helical gear until it bottoms.

(8)

position the forward side gear and helical drive gear assembly over the interaxle differential

case and nest assembly already in position, Ensure that alinement marks are in proper position as shown

(fig. 11-38).

Figure 11-38. Install the Helical Gear Assembly.

11-36