TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 248 of 400

TM 9-2320-283-13&P

0033

0033-8

0033-8

INSTALLATION – CONTINUED

11.

Close center control panel (figure 12, item 2), and turn two turnlock fasteners (figure 12, item 1)

90 degrees.

1

2

1

2

4

5

3

Figure 12. Closing Center Control Panel.

CAUTION

Plastic bulkhead nuts shall be finger tightened on bulkhead

connectors. Over tightening plastic nut strips threads and damages

bulkhead.

NOTE

Assistant will help with installation of harness bulkhead connectors.

12.

Install modulator harness bulkhead connector (figure 13, item 4) on hole (figure 13, item 5) closest to

steering column with washer (figure 13, item 2) and nut (figure 13, item 1).

13.

Repeat step 12 for installation of speed sensor harness bulkhead connector on hole (figure 13, item 3).

Figure 13. Installing ABS ECU Harness Bulkhead Connectors.