TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 500 of 1348
GROUP III TERMINAL REPAIR - Continued
2
1
Figure 23.
Group III Terminal Assembly.
CAUTION
To prevent damage to individual wire strands, strip wire after placing it through seal.
2.
Strip end of wire (Figure 23, Item 1) leaving 0.25 in. (6.35 mm) of bare wire.
3.
Insert new terminal (Figure 24, Item 1) in locating hole of crimping tool using the proper hole according to
gauge or wire (Figure 24, Item 2).
2
3
4
1
Figure 24.
Group III Terminal Assembly.
4.
Slide wire seal (Figure 24, Item 3) down to end of insulation (Figure 24, Item 4) on wire (Figure 24, Item 2).
NOTE
Wire and seal should be positioned so larger wings of terminal will crimp around insulation
and smaller wings will crimp around exposed bare wire.
5.
Position wire (Figure 25, Item 3) on terminal (Figure 25, Item 1).
TM 9-2330-342-23&P
0055
0055-16
Back to Top
