TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 498 of 1348
GROUP III TERMINAL REPAIR
DISASSEMBLY
NOTE
•
Connector is removed by gently prying up on clip and pulling on connector.
•
All Group III connectors are repaired the same way. Number of wires in connector
may vary.
•
Both halves of connector are repaired the same way.
1.
Disconnect connector (Figure 20, Item 1).
2
2
1
1
Figure 20.
Group III Terminal Disassembly.
2.
Unlatch and remove two secondary locks (Figure 20, Item 2) on connector (Figure 20, Item 1).
WARNING
Wear a face shield when removing spacer. Failure to comply may result in injury or death to
personnel.
3.
Insert removal tool into terminal connector cavity (Figure 21, Item 1) until sealed.
TM 9-2330-342-23&P
0055
0055-14
Back to Top
