GROUP II TERMINAL REPAIR - Continued
1
2
3
Figure 18.
Group II Terminal Assembly.
6.
Press handles of crimping tool together until ratchet releases and crimp is complete.
7.
Push new terminal (Figure 18, Item 2) and wire (Figure 18, Item 3) through connector (Figure 18, Item 1) until
seated.
8.
Close two secondary locks (Figure 19, Item 1) on connector (Figure 19, Item 2).
1
1
2
Figure 19.
Group II Terminal Assembly.
9.
Connect connector (Figure 19, Item 2).
END OF TASK
TM 9-2330-342-23&P
0055
0055-13