TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 488 of 1348
TYPE 2 CONNECTOR REPAIR - Continued
1
2
3
4
5
6
Figure 4.
Type 2 Connector Assembly.
2.
Install cable clamp (Figure 4, Item 5) on connector (Figure 4, Item 4) with two screws (Figure 4, Item 6).
3.
Install heat shrink (Figure 4, Item 1) around wire (Figure 4, Item 2).
END OF TASK
TYPE 3 CONNECTOR REPAIR
DISASSEMBLY
1.
Slide outer shell (Figure 5, Item 1) back on wire (Figure 5, Item 5).
1
2
3
4
5
Figure 5.
Type 3 Connector Disassembly.
2.
Remove C-washer (Figure 5, Item 2) from wire (Figure 5, Item 5).
3.
Cut terminal (Figure 5, Item 3) from wire (Figure 5, Item 5). Discard terminal.
4.
Trim end of wire (Figure 5, Item 5) as needed to make an undamaged end.
TM 9-2330-342-23&P
0055
0055-4
Back to Top
