TM-9-2330-356-14

SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1990

TM-9-2330-356-14 - Page 330 of 528

TM 9-2330-356-14

Figure

5-7.

Engine and Pump Assembly InstaIled on Semitrailer.

(9)

Remove four locknuts and capscrews

(fig. 5-8) which secure rear cross brace to engine frame.

Remove six locknuts and capscrews which fasten the

support bracket for the engine frame to the tank frame

near front of semitrailer. The support bracket should

remain on the engine frame.

(10) Position lift truck forks under engine frame to

take up the weight of the engine module. Remove

locknuts and capscrews which fasten engine module to

tank. Slowly remove module by backing the lift truck

straight away from the semitrailer.

b.

Installation.

(1) Move pump and engine module into position

with forklift truck. Attach engine frame to semitrailer with

capscrews and locknuts.

(2) Attach front support bracket (fig. 5-8) to

semitrailer frame with six capscrews and locknuts. Attach

rear cross brace to engine frame with four capscrews and

locknuts. Tighten all nuts. Remove forklift truck.

Figure

5-8.

Engine Frame Mounting Brackets.

5-22