TM-9-2330-356-14

SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1990

TM-9-2330-356-14 - Page 332 of 528

TM 9-2330-356-14

Figure 5-10. Pump Installation, 4-Inch {Also Typical of 3-Inch Pump).

(6)

Install batteries and connect battery cables

(para 4-23).

NOTE

The pump Is self-priming. Filling the pump is

necessary only when the pump has been

drained.

(7) Ensure that drain plug is installed at bottom

of pump. Remove filler plug near top of pump and fill

pump with fuel that is to be pumped. Install filler plug,

5-20. Engine (Fig. 5-1 1)

a.

Removal.

(1) Remove engine and pump as a unit from the

semitrailer (para 5-18).

(2) Remove pump assembly from engine

(para 5-19).

(3) Remove ten nuts (29, fig. 5-11), twenty

washers (28), ten capscrews (27), and top panel (26).

(4) Tag and disconnect wiring harness and

electrical leads from engine (para 4-16).

(5) Remove fuel lines from fuel tank and engine

(para 4-73).

(6) Remove air cleaner hose from engine intake

manifold (para 4-74). The air cleaner and mounting

bracket can be removed with the engine fan shroud.

(7) Remove muffler and exhaust pipe

(para 4-77).

5-24