TM 9-2330-356-14
(4) Remove four mounting capscrews, washers,
and nuts from base of hose reel. Use a suitable lifting
device and remove hose reel from reel stand.
b.
Installation.
(1) Position hose reel on reel stand. Loosely
install four mounting screws, washers, and nuts. Do not
tighten until valve R is in place.
(2) Connect air lines to hose reel (para 4-89).
(3) Install valve R (fig 5-14) and meter assembly
(para 5-27).
(4) Tighten mounting nuts to 25-35 lb.-ft.
Figure 5-19. Deadman Hose Reel (M970 and M970A1).
5-33/(5-34 Blank)