TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 748 of 1364

TM 9-2350-238-20-1

2-114. MAINTENANCE OF RIGHT AND LEFT DISCONNECT TO HEADLAMP WIRING

HARNESSES (CONT).

1

Inspect for broken, damaged, or missing

4

Electrical wire and rod are manufactured

parts.

items, refer to appendix D.

2

If damaged or missing, replace marker

5

Repair is by replacement of authorized

bands. Etch or stamp lead number on

parts (TM 9-2350-238-24P-1).

new band.

3

For repair of cable terminal and shell

connectors, refer to general maintenance,

page 2-371.

REASSEMBLY

1

Install spring tension clip (1), two new lock-

6

Install electrical lead 19 through pin hole G

washers (2), and two machine screws (3)

in electrical insert (7) and rubber bushing

2

3

4

5

on threaded base (4).

Install new nonmetallic seal (5) on

threaded base (4).

Align rubber bushing (6) with keyway in

threaded base (4), and install rubber

bushing in threaded base.

Install electrical insert (7) in threaded base

(4). Install rod (8) in electrical insert.

Solder electrical wire (9) to electrical

contacts (10) with solder per TB SIG-222.

(6).

7

Install electrical lead 18 through pin hole A

in electrical insert (7) and rubber bushing

(6).

8

Install electrical lead 17 through pin hole B

in electrical insert (7) and rubber bushing

(6).

9

Install electrical lead 91 through pin hole C

in electrical insert (7) and rubber bushing

(6).

2-722