TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 754 of 1364

TM 9-2350-238-20-1

2-117. MAINTENANCE OF WARNING LIGHT LOW COOLANT DETECTOR TO

BULKHEAD DISCONNECT BRANCHED WIRING HARNESS (CONT).

Failure to remove or disconnect

batteries before removing or installing

any electrical wiring harness or lead

may result in injury or damaged

equipment.

1

Wiring harnesses and leads are secured to

the engine with loop clamps, straps, clips,

ground screws, etc. Remove only the

hardware which secures the wiring har-

ness or lead being removed.

2

Remove two screws (1) and aeration

detection cover (2).

3

Tag and disconnect two shell connectors

(3) from line disconnects to warning light.

4

Tag and disconnect shell connector (4)

from diode assembly and transmission

temperature warning switch.

5

Tag and disconnect three cable terminals

(5) from aeration detector.

6

Tag and disconnect cable terminal (6) from

ground.

7

Remove warning light low coolant detector

to bulkhead disconnect branched wiring

harness (7) from powerplant.

2-728