TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 760 of 1364

I

I

TM 9-2350-238-20-1

2-120. MAINTENANCE OF MASTER RELAY TO BULKHEAD DISCONNECT SPECIAL

CABLE ASSEMBLY (CONT).

2

Tag and disconnect plug connector (1)

from bulkhead disconnect to batteries.

Failure to remove or disconnect

batteries before removing or installing

3

Tag and disconnect plug connector (2)

any electrical wiring harness or lead

from master relay.

may result in injury or damaged

equipment.

4

Remove master relay to bulkhead

disconnect electrical lead (3) from hull

1

Wiring harnesses and leads are secured to

through driver’s compartment.

the hull and components with loop clamps,

straps, clips, ground screws, etc. Remove

only the hardware which secures the

wiring harness or lead being removed.

For disassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

1

Inspect for broken, damaged, or missing

parts.

2

If damaged or missing, replace marker

bands. Etch

new band.

or stamp lead number on

3

Electrical wire is a manufactured item,

refer to appendix D.

4

Repair is by replacement of authorized

parts (TM 9-2350-238-24 P-1).

2-734