TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 756 of 1364

TM

2-1

9-2350-238-20-1

18. MAINTENANCE OF AERATION DETECTOR BRANCHED WIRING HARNESS.

This task covers:

a.

Removal

b.

Inspection/Repair

c. Installation

INITIAL SETUP

Matetials/Parts

Electrical wire (figure D-2, appx D)

References

TM 9-2350-238-24P-1

Equipment Conditions

2-640 Batteries disconnected

2-384 Powerplant removed

General Safety Instructions

Failure to remove or disconnect

batteries before removing or installing

any electrical wiring harness or lead

may result in injury or damaged

equipment.

Failure to remove or disconnect

batteries before removing or installing

any electrical wiring harness or lead

2

may result in injury or damaged

equipment.

3

1

Wiring harnesses and leads are secured to

the powerplant with loop clamps, straps,

ground screws, etc. Remove only the

hardware which secures the wiring

harness or lead being removed.

Tag and disconnect shell connector (1)

from horn relay.

Tag and disconnect shell connector (2)

from aeration detector lead and diode

assembly (3).

2-730