TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 470 of 779

Remove

Note.

It will be necessary to move the cam -

shaft drive gear away from the camshaft driven

gear to gain clearance for removal of the cam -

shaft assembly .

1. Remove right camshaft assembly (A) from camshaft

drive housing.

2. Remove camshaft drive gearshaft (B),

Install

1. Position camshaft drive gearshaft (B) in camshaft

drive housing.

2. Position right camshaft assembly (A) in camshaft

drive housing.

Disassemble

1. Place camshaft (A) assembly in a soft-jawed vise.

2. Cut locking wire and remove eight drilled head bolts

(B).

3. Remove gear cover (C).

4. Remove camshaft driven gear (D).

Assemble

1. Place camshaft (A) in a soft-jawed vise.

2. Position camshaft driven gear (D) on camshaft.

3. Position gear cover (C) on camshaft.

4. Install eight drilled head bolts (B) and install locking

wire securing bolts.

Figure 6-211. Disassembling or assemblin g

camshaft assembly .

Figure 6-210. Removing or installing righ t

camshaft assembly .

6-176