TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 471 of 779

Remove

Install

1. Place throttle shaft (A) in a soft-jawed vise.

1. Place throttle shaft (A) in a soft-jawed vise.

2. Remove the right camshaft. end plate (B) from throttle

2. Position right camshaft end plate (B) on throttle shaft

shaft by carefully tapping on end plate with a soft

hammer.

aud carefully tap end plate on shaft with a soft hammer.

Figure 6-212. Removing or installing right camshaft end plate .

6-17 7