TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 600 of 856

DISASSEMBLY - Continued

11.

On models 5063-5392, 5063-5393, and 5063-539L, remove four screws (Figure 4, Item 19) fastening

backplate (Figure 4, Item 20) to center housing (Figure 4, Item 2).

12.

Tap backplate (Figure 4, Item 20) lightly and remove from center housing (Figure 4, Item 2).

13.

Remove seal ring (Figure 4, Item 21) from groove in center housing (Figure 4, Item 2). Discard seal ring.

14.

On models 5063-5392, 5063-5393, and 5063-539L, remove three socket head screws (Figure 4, Item 33)

and thrust washer (Figure 4, Item 25) from center housing (Figure 4, Item 2). Discard thrust washer

and screws.

15.

Remove thrust spacer (Figure 4, Item 23) with metal seal rings (Figure 4, Item 22), and thrust collar

(Figure 4, Item 24) from backplate (Figure 4, Item 20). Remove two seal rings from spacer. Discard

seal rings.

16.

Remove bearing (Figure 4, Item 26), flat washer (Figure 4, Item 27), and retaining ring (Figure 4, Item 28)

from center housing (Figure 4, Item 2). Discard bearing, flat washer, and retaining ring.

17.

Remove outer retaining ring (Figure 4, Item 29), bearing (Figure 4, Item 30), and flat washer

(Figure 4, Item 31) from compressor end of center housing (Figure 4, Item 2), then remove inner retaining

ring (Figure 4, Item 32). Discard retaining rings, flat washer, and bearing.

19

20

21

22

23

24

31

30

29

28

27

26

25

32

2

33

MAINT_304

Figure 4.

Turbo Center Housing Disassembly.

END OF TASK

TM 9-2815-205-24

0086

0086-4