TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 614 of 856

CLEANING

WARNING

Cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves;

use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and

do not breathe vapors. Keep away from heat or flame. Never smoke when using

cleaning solvent. Failure to comply may result in injury, illness, or death to

personnel.

Compressed air used for cleaning purposes will not exceed 30 PSI (207 kPa). Use

only with protective equipment (goggles, face shield, gloves, etc.). Failure to

comply may result in injury to personnel.

Clean all parts with cleaning solvent and dry with compressed air.

END OF TASK

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA

1.

Inspect bearings for corrosion or pitting. Revolve bearings by hand and check for rough or tight spots.

2.

Inspect needle bearings in control link lever assembly and mating lever pin for wear.

3.

Inspect governor springs, spring seat, spring cap, plunger, spring retainer, adjusting screws, and other parts

of governor for wear.

4.

Inspect governor housing for cracks, warpage, and damaged threads.

END OF TASK

TM 9-2815-205-24

0087

0087-6