TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 369 of 596

TM 9-2815-205-34

(14) Install gasket (13), cover plate (11), two lockwashers (10), and two bolts (9) on right side of

block, Torque bolts to 13-17 lb-ft (18-23 N·m).

(15) Install draincock (12) in cover plate (11).

NOTE

On models 5063-5393, and 5063-539L, airbox cover with threaded hole must be at

right side front position and hole toward the front.

(16) Install clamp (6), copper gasket (3), flat washer (2), and screw (1) on airbox cover (4) Install

gasket (5) on airbox cover using gasket adhesive. Turn clamp until positioned between tangs on

back of airbox cover. Insert four airbox cover assemblies into cylinder block, place clamp

against inner cylinder block wall, and tighten screws to 12-15 lb-ft (16-20 N·m).

(17) On models 5063-5393, and 5063-539L, install transducer assembly (8) in right front airbox

cover (4).

Change 1

3-239