TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 111 of 400

0018-9

TM 9-2320-283-13&P

0018

SEAL INSTALLER

1 (CHR47697)

2

3

REAR-REAR AXLE COMPONENTS INSTALLATION – CONTINUED

NOTE

Do not get grease on rear seal shoulder bore of wheel hub when

installing inner bearing cone.

20.

Apply grease to inner bearing cone (figure 15, item 2), and set inner bearing cone (figure 15, item 2) on

inner cup in rear hub (figure 15, item 3).

21.

Apply sealant to outside edge of new seal (figure 15, item 1), and position seal (figure 15, item 1) on

rear wheel hub (figure 15, item 3) with tapered side of seal facing up.

22.

Using seal installer, drive seal (figure 15, item 1) into shoulder bore of rear hub (figure 15, item 3) until

fully seated.

Figure 15. Installing Inner Bearing Cone and Seal.