TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 119 of 400

0018-17

TM 9-2320-283-13&P

0018

1 (CHR35066)

SEAL INSTALLER

2

3

FRONT AXLE COMPONENTS INSTALLATION – CONTINUED

NOTE

Do not get grease on rear seal shoulder bore of wheel hub when

installing inner bearing cone.

21.

Apply grease to inner bearing cone (figure 28, item 2), and set inner bearing cone (figure 28, item 2) on

inner cup of front hub (figure 28, item 3).

22.

Apply sealant to outside edge of new seal (figure 28, item 1), and position seal (figure 28, item 1) on

front hub (figure 28, item 3) with tapered side of seal facing up.

23.

Using seal installer, drive seal (figure 28, item 1) into shoulder bore of front hub (figure 28, item 3) until

fully seated.

Figure 28. Installing Inner Bearing Cone and Seal.