TM-9-2320-283-13-P
ANTI-LOCK BRAKE SYSTEM (ABS) M915A1
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
AUGUST 2012
TM-9-2320-283-13-P - Page 124 of 400
0018-22
TM 9-2320-283-13&P
0018
1
2
3
4
5
6
7
8
9
REMOVAL OF ITEMS FOR ACCESS OR REUSE – CONTINUED
6.
Disconnect tube (figure 34, item 9) from mountable tee (figure 34, item 4), and remove air hose
assembly (figure 34, item 6) from elbow (figure 34, item 7) on quick-release valve (figure 34, item 8)
and mountable tee (figure 34, item 4).
7.
Remove pipe plug (figure 34, item 5) from mountable tee (figure 34, item 4), and remove screw (figure
34, item 1), lockwasher (figure 33, item 2), and mountable tee (figure 34, item 4) from right frame rail
(figure 34, item 3) adjacent to rear-rear axle. Discard lockwasher (figure 34, item 2).
Figure 34. Removing Mountable Tee at Rear-Rear Axle.
8.
Disconnect tubes (figure 35, items 6 and 10) from adapter (figure 35, item 9) and elbow
(figure 35, item 7), and remove adapter (figure 35, item 9), elbow (figure 35, item 7), and elbow (figure
35, item 2) from quick-release valve (figure 35, item 8).
9.
Remove two locknuts (figure 35, item 4), washers, (figure 35, item 3), screws (figure 35, item 1), and
quick-release valve (figure 35, item 8) from bracket (figure 35, item 5) on forward-rear axle. Discard all
removed items in this step.
10.
Disconnect tubes (figure 35, items 13 and 17) from two adapters (figure 35, item 14), and remove adapters
(figure 35, item 14) and elbow (figure 35, item 15) from quick-release valve (figure 35, item 18).
11.
Remove two locknuts (figure 35, item 11), washers, (figure 35, item 12), screws (figure 35, item 16),
and quick-release valve (figure 35, item 18) from bracket (figure 35, item 19) on rear-rear axle. Discard
all removed items in this step.
Back to Top
