TM-9-2320-283-13-P
ANTI-LOCK BRAKE SYSTEM (ABS) M915A1
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
AUGUST 2012
TM-9-2320-283-13-P - Page 122 of 400
0018-20
TM 9-2320-283-13&P
0018
1
2 (GUNW3710X)
3
FRONT AXLE COMPONENTS INSTALLATION – CONTINUED
WARNING
Two personnel are required to install drum on hub. Brake drum
weighs 85 lbs (39 kg). Failure to comply may result in injury to
personnel. Seek medical attention in the event of an injury.
35.
Carefully slide new front brake drum (figure 31, item 2) over wheel studs (figure 31, item 1) on front
hub (figure 31, item 3).
36.
Repeat steps 30 through 35 for installation of opposite brake shoes and new front brake drum on front
axle.
Figure 31. Installing Front Brake Drums.
END OF TASK
REMOVAL OF ITEMS FOR ACCESS OR REUSE
NOTE
The following items are removed for access during installation of
ABS components or are removed to be used in new locations or
discarded. Retain all removed parts except those listed to be
discarded.
1.
Remove nut (figure 32, item 2), screw (figure 32, item 3), and strap (figure 32, item 13) from clamp
(figure 32, item 1) on air hose tender (figure 32, item 5).
2.
Disconnect emergency air pressure coupling (figure 32, item 12) and service air pressure coupling
(figure 32, item 4) from storage brackets (figure 32, item 11) on air hose tender (figure 32, item 5), and
set air hoses on spare tire carrier.
WARNING
Two personnel are required to remove service deck assembly from
tractor frame due to its size. Failure to comply may result in injury to
personnel. Seek medical attention in the event of injury.
3.
Remove four bolts (figure 32, item 7) and washers (figure 32, item 6) from service deck assembly
(figure 32, item 10) and four tabs (figure 32, item 8), and remove service deck assembly
(figure 32, item 10) from tractor frame (figure 32, item 9).
Back to Top
