TM-9-2320-283-13-P
ANTI-LOCK BRAKE SYSTEM (ABS) M915A1
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
AUGUST 2012
TM-9-2320-283-13-P - Page 137 of 400
0018-35
TM 9-2320-283-13&P
0018
1
2
3
4
5 (W48X8)
6 (HDX11307)
7 (001-020-19-38)
8
*
9
10
11
12
*
13
14
INSTALLATION OF ABS AIR LINES – CONTINUED
NOTE
Screws and washers removed with quick-release valve at forward-
rear axle are used to install bulkhead fitting mount on forward-rear
axle.
27.
Install new bulkhead fitting mount (figure 53, item 7) on bracket (figure 53, item 3) at top of
forward-rear axle (figure 53, item 14) with two screws (figure 53, item 13), washers (figure 53, item 1),
and new locknuts (figure 53, item 2).
28.
Install new bulkhead fitting (figure 53, item 6) on bulkhead fitting mount (figure 53, item 7) with new
lockwasher (figure 53, item 8) and new nut (figure 53, item 12).
NOTE
Elbow, installed in step 29 below, is reused from previously removed
forward-rear axle quick-release valve.
29.
Install elbow (figure 53, item 11) and new adapter (figure 53, item 5) on bulkhead fitting
(figure 53, item 6), and connect tube (figure 53, item 10) from left spring brake chamber
(figure 53, item 9) to elbow (figure 53, item 11) and hose assembly (figure 53, item 4) from left-front
bulkhead to adapter (figure 53, item 5).
*
ITEM 8 SUPPLIED WITH ITEM 6
*
ITEM 12 SUPPLIED WITH ITEM 6
Figure 53. Installing Forward-Rear Axle Bulkhead.
Back to Top
