TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 143 of 400

0018-41

TM 9-2320-283-13&P

0018

1

2

3

4

5

1 (W1468X6X2)

2

3

4

5

6

7 (W1468X8)

8 (PHPFT-8BGRN100)

INSTALLATION OF ABS AIR LINES - CONTINUED

47.

Connect tubes (figure 60, items 3 and 4) to adapter (figure 60, item 1) and elbow (figure 60, item 2)

located at front end of primary reservoir (figure 60, item 5).

Figure 60. Connecting Tubes to Primary Reservoir.

NOTE

The 3/8 in. (9.5 mm) green tubing between the double check valve

and the tee on the double check valve stop/light switch is replace

with 1/2 in. (13 mm) green tubing.

48.

Remove tube (figure 61, item 8) from elbows (figure 61, items 1 and 6), elbow (figure 61, item 6) from

double check valve (figure 61, item 5), and elbow (figure 61, item 1) from tee (figure 61, item 3) at

double check valve/stoplight switch (figure 61, item 4). Discard tube (figure 61, item 8).

49.

Install new adapter (figure 61, item 7) on double check valve (figure 61, item 5), and install new adapter

(figure 61, item 2) on tee (figure 61, item 3) at double check valve/stoplight switch

(figure 61, item 4).

50.

Cut and install new piece of 1/2 in. (13 mm) green tubing (figure 61, item 8) on adapters

(figure 61, items 2 and 7).

Figure 61. Replacing Tube Between Double Check and Quick Release Valves.