TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 142 of 400

0018-40

TM 9-2320-283-13&P

0018

1

2

3

4

5

6

7

8

9

10

11

INSTALLATION OF ABS AIR LINES – CONTINUED

43.

Route 5/8 in. (16 mm) green tube (figure 59, item 1) from brake treadle valve along left frame rail

(figure 59, item 10), and connect end of tube (figure 59, item 1) to elbow (figure 59, item 11) on

primary reservoir (figure 59, item 4). Secure tube (figure 59, item 1) with tie straps.

44.

Connect tube (figure 59, item 2) to adapter (figure 59, item 3) on primary reservoir (figure 59, item 4).

NOTE

Mounting primary reservoir after routing ABS wiring harness along

left frame rail makes installation of wiring harness easier.

45.

Position primary reservoir (figure 59, item 4) on lower clamps (figure 59, item 8), and install upper

clamps (figure 59, item 6) on left frame rail (figure 59, item 10) with two nuts (figure 59, item 7).

46.

Secure primary reservoir (figure 59, item 4) to left frame rail (figure 59, item 10) and two upper and

lower clamps (figure 59, items 6 and 8) with two screws (figure 59, item 5) and nuts (figure 59, item 9).

Figure 59. Installing Primary Reservoir.