TM-9-2330-356-14

SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1990

TM-9-2330-356-14 - Page 385 of 528

TM 9-2330-356-14

Figure 7-34. Crankshaft Bearing Installation.

g.

Check crankshaft end

play (fig. 7-35). Use

enough rear bearing plate shims (23, fig. 7-27) to provide

0.010- to 0.015-inch end play. If more than 0.010-inch total

thickness is required, use a steel shim of proper thickness

and a 0.005-inch thick gasket on each side of shim. This

avoids excessive gasket compression and maintains bolt

torque.

h.

Install new gasket (22, fig. 7-31) and backplate

(21). Secure with capserew (36), lockwasher (37), and two

flat head screws (20).

i.

Install baffle (35) onto backplate (21). Secure with

capscrew (18) and lockwasher (19).

j.

Install starter and mounting bracket (34) onto

backplate (21) with three capscrews (32) and lockwashers

(33).

Figure 7-35. Crankshaft End Play Measurement.

7-29